Not an Alta, but a similar looking Hex. Modeled in Fusion 360, frame cut on a Stepcraft and 3D printed parts on an Ender 3 (slightly modified).
PX4 with a Cube Orange
Dual APD PDB500 for redundancy
T-Motor integrated propulsion system (Roughly 5000g thrust per motor)
Dual 6S, 12000 mAh Tattu packs for 30 minute (unloaded) flight time.
Drotek GPS module with Harxon GPS antenna.
Flight Controller |
The Cube Orange With ADSB-In Overview¶
Ardupilot.org
|
See Site |
Motors |
4 x T-MOTOR The Safer Propulsion System
Uav-en.tmotor.com
|
See Site |
Propellers |
MF1806_Polymer Folding_Polymer_Propellers_Multirotor_T-MOTOR Store-Official Store for T-motor drone motor,ESC,Propeller
Store.tmotor.com
|
See Site |
Receiver |
R7008SB S.Bus2 FASSTest Receiver 14SG 18MZ 18SZ | $169.99 |
Batteries |
Tattu 22.2V 30C 6S 12000mAh Lipo Battery Pack with EC5 Plug for UAV Drone
Genstattu.com
|
$268.99 |
Power Distribution |
PDB500[X] — Advanced Power Drives
Powerdrives.net
|
See Site |
Radio |
FMT-02 (14-Channel) - Futaba Industrial Radio Control
Futabairc.com
|
See Site |
Goggles |
Fatshark Dominator HDO 2 V2.1 OLED FPV Goggles
(65 builds)
Pyrodrone.com
|
$499.00 |
AirbladeUAV has done it again and this time they've brought long range to the 5" class! Based on the popular Transformer Mini, the new Transformer 5" Ultralight adopts a lot of the same design philosophies with larger props and more payload capacity. It can fly upwards of 20 minutes on a 4 cell Li-Ion battery pack and in ideal conditions it's got a range of over 4 to 5 miles. In this guide I'll walk..
Read moreWith the release of the DJI FPV Drone cinematic FPV has become a lot more accessible, but you certainly don't want to crash a $750 drone! The QAV-CINE Freybott is a compact, lightweight cinematic FPV drone that can take a hit and keep going. It's a lot safer to fly indoors and around people. With a naked GoPro or the SMO 4k you can capture some great stabilized footage. In this guide I'll show you..
Read more
What all do you plan on using this for? looks really cool man!
Thanks! No plans for this one. Just built as an experiment.