Locanam3DPrinting commented on a Page, SLS 3D Printing  -  Nov 16, 2023

FDM 3D PRINTING
Fused deposition modelling (FDM), also known as the material extrusion additive manufacturing technique, utilizes polymers as the raw material (filament). The filament is usually heated to a molten state and then extruded through the nozzle of the machine (3D printer). The nozzle head can move in three degrees of freedom (DoF) to deposit the extruded polymer on the build plate as per the G-code instructions. As shown, the filament is continuously fed through the extruder and nozzle of the machine via the two rollers rotating in opposite directions.

 Respond  
Are you sure you want to unfollow this person?
Are you sure you want to delete this?
Click "Unsubscribe" to stop receiving notices pertaining to this post.
Click "Subscribe" to resume notices pertaining to this post.